At ZYUS, we offer consistent, high-quality formulations with carefully engineered cannabinoid ratios to make dosing convenient and simple for you. We encourage you to work with your healthcare practitioner to select a formulation that responds to your needs and provides you with relief targeted to your condition or symptoms.
Dosing schedule recommendations will vary depending on individual response rates and potential side effects.
It is important that you work with your healthcare practitioner (HCP) to select an oil formulation that is right for you. An alternate formulation may be recommended to you if you do not experience symptom relief after 14 days of use.
Start with a Low Dose
Titrate up as Needed
Use a diary, such as the ZYUS Patient Diary that you will receive to keep track of your symptoms that you can share with your healthcare practitioner
Contact your HCP
If you have any questions, talk to your healthcare practitioner or reach out to the
ZYUS Patient Care Centre to speak with a pharmacist
How to Take Your ZYLEM Oil Formulation
STEP 1 Open ZYLEM oil formulation bottle
To open the bottle, push the bottle cap downward and twist it counter-clockwise. The bottle cap will loosen and you may lift to remove.
STEP 2 Insert syringe into bottle
Before insertion, ensure the syringe plunger is pushed down completely. Carefully insert the syringe into the bottle by pressing it downwards. Secure the syringe by twisting it counter-clockwise until its tip is fixed into the bottle mouth.
STEP 3 Draw the dose from bottle
Once the syringe is fixed firmly into the bottle, carefully invert the set-up so that the bottle faces downward. Slowly pull the plunger to draw the formulation from the bottle and monitor the amount being extracted using the edge of the plunger. Begin with the dose authorized by your healthcare practitioner (HCP) and titrate accordingly. Remember to track your dosing journey to share with your HCP.
STEP 4 Restore bottle in an upright position
Once you have drawn your dose, support the syringe and bottle and slowly re-position the set-up so that your bottle is in an upright position.
STEP 5 Remove syringe from bottle
Slowly remove the syringe (by the barrel) from the bottle in an upward motion. Do not remove the syringe by the plunger.
STEP 6 Taking dose from syringe
Angle the syringe above your mouth and tilt it downward. Slowly press the plunger to release the formulation and drop carefully into your mouth. Dropping it underneath the tongue is not required. You can take your oil with or without food, although we recommend taking it with a small amount food that are rich in healthy fats as it may increase absorption of the oil and could reduce side effects. Avoid taking your oil with citrus food or drinks as it could interfere with its absorption.
How to Clean Your Syringe
Your syringe should be washed prior to first use and can be re-used once it has been thoroughly cleaned. To clean your syringe:
Disassemble it into its components and carefully clean with dish soap (use sparingly) and water.
Use clean warm water to rinse thoroughly and reassemble the syringe.
Draw hot water into your syringe until it reaches the edge of the plunger.
Shake your syringe and tap it for at least 30 seconds. Press down on the plunger to release water.
Repeat steps 3 – 4 three more times.
Leave syringe disassembled to air dry before next use.
When cleaning your syringe, ensure you use clean water. Do not reuse water.
Sorry, you must be over the legal age to view this content
You must be of legal age in your province to gain access.